Resources

Campbell Company – Useful Links

MUTCD 2009 Edition – FHWA MUTCD
The most current version of the MUTCD is the 2009 Edition, dated December 2009. Links to previous versions are listed below. For historical reference and to know what was in effect for a given date, these previous versions will be maintained on this Web site.
The official version of the 2009 MUTCD is the PDF version.
Access Board – Revised Draft Guidelines for Accessible Public Rights-of-Way
The Americans with Disabilities Act (ADA) recognizes and protects the civil rights of people with disabilities and is modeled after earlier landmark laws prohibiting discrimination on the basis of race and gender. To ensure that buildings and facilities are accessible to and usable by people with disabilities, the ADA establishes accessibility requirements for State and local government facilities, places of public accommodation, and commercial facilities. Under the ADA, the Access Board has developed and continues to maintain design guidelines for accessible buildings and facilities known as the ADA Accessibility Guidelines (ADAAG). ADAAG covers a wide variety of facilities and establishes minimum requirements for new construction and alterations.
Walkinginfo.org
The Pedestrian and Bicycle Information Center (PBIC) is a national clearinghouse for information about health and safety, engineering, advocacy, education, enforcement, access, and mobility for pedestrians (including transit users) and bicyclists. The PBIC serves anyone interested in pedestrian and bicycle issues, including planners, engineers, private citizens, advocates, educators, police enforcement, and the health community.
Accessible Pedestrian Signals: Prioritizing APS Installations
The information regarding prioritizing intersections for installation of APS is not intended for application to new or reconstructed intersections. In new construction or reconstruction projects, it is appropriate to consider the Draft PROWAG as the best guidance available at this time (Isler memo, 2006). In new construction, APS should be installed wherever pedestrian signals are installed.
Accessible Pedestrian Signals: MUTCD 2003
Section 4D.03 Provisions for Pedestrians Support: Chapter 4E contains additional information regarding pedestrian signals. Standard: The design and operation of traffic control signals shall take into consideration the needs of pedestrian as well as vehicular traffic. If engineering judgment indicates the need for provisions for a given pedestrian movement, signal faces conveniently visible to pedestrians shall be provided by pedestrian signal heads or a signal face for an adjacent vehicular movement.
Accessible Pedestrian Signals: U.S. Legislation, Standards, and Guidance Applicable to APS
Transportation Equity Act for the 21st Century The Transportation Equity Act for the 21st Century (TEA-21) stated that pedestrian safety considerations should be included in new transportation plans and projects. Section 1202 (g)(2) directed that they “…shall include the installation, where appropriate, and maintenance of audible traffic signals and audible signs at street crossings.” Required that FHWA develop guidance on pedestrian and bicycle facility design. A Policy Statement on Accommodating Bicyclists and Pedestrians in Transportation Projects was written, which includes the following statement: “Sidewalks, shared use paths, street crossings (including over- and undercrossings), pedestrian signals, signs, street furniture, transit stops and facilities, and all connecting pathways shall be designed, constructed, operated and maintained so that all pedestrians, including people with disabilities, can travel safely and independently”. (TEA-21, 1998)
Accessible Pedestrian Signals: Where are APS Required?
Where are APS Required? Current practice Currently in the U.S., APS are typically installed upon request along a specific route of travel for a particular individual, or group of individuals who are blind or visually impaired. Various states and municipalities have established policies on installation of APS, some of which may not be in accordance with Americans with Disability Act (ADA) requirements.
Accessible Pedestrian Signals – Guide to Best Practices
The content of this site is a product of the National Cooperative Highway Research Program Project 3-62, Guidelines for Accessible Pedestrian Signals. This research study used extensive field testing to determine which APS features and locations are most beneficial for blind and visually impaired pedestrians. The web site content was adapted from the document produced by the NCHRP study, entitled Accessible Pedestrian Signals: A Guide to Best Practices.
ADA Accessibility Guidelines

Documents

Access Board Updated Accessibility Guidelines

Access Board Notice of Proposed Rulemaking 7-26-11

 

Comments are closed.